charlot Membre
Nombre de messages : 458 Age : 82 Date d'inscription : 12/10/2007
| Sujet: (Résolu)Copie dvd avec nero Décembre 27th 2010, 07:49 | |
| Bonjour,
Je ne suis plus capable de graver des dvd avec Nero Burning rom ni nero express semble incapable d'enregister gravure tombe toujour en échec je vous joins le rapport peut-être y comprendrez vous quelque chose
ORDI
1A23-0006-7130-1343-7712-7580 1A44-0000-0000-2549-3453-9541
Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003-12-16 20:18:06 Version de Nero : 6.3.1.18 Graveur : <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.06 - HA 1 TA 0 - 6.3.1.18 Pilote d'adaptateur :<atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder CD-ROM : <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.06 - HA 1 TA 0 - 6.3.1.18 Pilote d'adaptateur :<atapi> HA 1
=== Scsi-Device-Map === DiskPeripheral : WDC WD300BB-00CCB0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H55N atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map === HL-DT-ST DVD-RAM GSA-H55 D: CDRom0 HL-DT-ST CD-RW GCE-8525B E: CDRom1 =======================
AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 767MB (785952kB) Free physical memory: 533MB (546392kB) Memory in use : 30 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0)
27.12.2010 ===== Disc-Copy over image - 1st step : Copy to image ...
07:20:05 #1 SCSI -1081 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x53 Sense Qual: 0x02 CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x53 0x02 07:20:32 #2 Text 0 File DlgWaitCD.cpp, Line 258 Write in overburning mode: NO (enabled: CD) 07:20:32 #3 Text 0 File DlgWaitCD.cpp, Line 419 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the original disc. (Medium in drive: Inconnu. Medium required by compilation: DVD.) 07:20:32 #4 Text 0 File Reader.cpp, Line 118 Reader running 07:20:32 #5 Text 0 File Writer.cpp, Line 124 Writer Image Recorder running 07:20:32 #6 Text 0 File DVDCopy.cpp, Line 271 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 12272 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0) S01 T02 Con 0x14 Start 12288 Len 256 (gap 16) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0) S01 T03 Con 0x14 Start 12560 Len 1629856 (gap 16) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0) S01 T04 Con 0x14 Start 1642432 Len 16 (gap 16) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0) S01 T05 Con 0x14 Start 1642464 Len 16 (gap 16) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0) 07:20:32 #7 Text 0 File DVDCopy.cpp, Line 374 Max -1 tracks of 5 allowed to copy 1: 0 - 12272 = 12272, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 2: 12288 - 12544 = 256, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 3: 12560 - 1642416 = 1629856, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 4: 1642432 - 1642448 = 16, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 5: 1642464 - 1642480 = 16, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 07:20:32 #8 Text 0 File Burncd.cpp, Line 3172 Turn on Piste par piste, using DVD-R/RW media 07:20:32 #9 Text 0 File DlgWaitCD.cpp, Line 246 Last possible write address on media: 2147483646 (477218:35.21, 4194303MB) Last address to be written: 1642479 (364:59.54, 3207MB) 07:20:32 #10 Text 0 File DlgWaitCD.cpp, Line 258 Write in overburning mode: NO (enabled: CD) 07:20:32 #11 Text 0 File DlgWaitCD.cpp, Line 2143 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 07:20:32 #12 Text 0 File DlgWaitCD.cpp, Line 419 >>> Protocol of DlgWaitCD activities: <<< ========================================= 07:20:32 #13 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Données (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 12288 (12288) = #12288/2:43.63 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 12288 blocks [ Image Recorder ] 1: TRM_DATA_MODE1 (2 - Données (mode 1)) 2 indices, index0 (0) not provided original disc pos #12288 + 272 (272) = #12560/2:47.35 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 272 blocks [ Image Recorder ] 2: TRM_DATA_MODE1 (3 - Données (mode 1)) 2 indices, index0 (0) not provided original disc pos #12560 + 1629872 (1629872) = #1642432/364:59.7 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1629872 blocks [ Image Recorder ] 3: TRM_DATA_MODE1 (4 - Données (mode 1)) 2 indices, index0 (0) not provided original disc pos #1642432 + 32 (32) = #1642464/364:59.39 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 32 blocks [ Image Recorder ] 4: TRM_DATA_MODE1 (5 - Données (mode 1)) 2 indices, index0 (0) not provided original disc pos #1642464 + 16 (16) = #1642480/364:59.55 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [ Image Recorder ] -------------------------------------------------------------- 07:20:32 #14 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [ Image Recorder ] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 5: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 25473024, ISRC "" 2: TRM_DATA_MODE1, 2048/0x00, FilePos 25473024 25473024 26030080, ISRC "" 3: TRM_DATA_MODE1, 2048/0x00, FilePos 26030080 26030080 3364007936, ISRC "" 4: TRM_DATA_MODE1, 2048/0x00, FilePos 3364007936 3364007936 3364073472, ISRC "" 5: TRM_DATA_MODE1, 2048/0x00, FilePos 3364073472 3364073472 3364106240, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 12288 | 2 | 0 | 0x00 | 0x41 12288 | 2 | 1 | 0x00 | 0x41 12560 | 3 | 0 | 0x00 | 0x41 12560 | 3 | 1 | 0x00 | 0x41 1642432 | 4 | 0 | 0x00 | 0x41 1642432 | 4 | 1 | 0x00 | 0x41 1642464 | 5 | 0 | 0x00 | 0x41 1642464 | 5 | 1 | 0x00 | 0x41 1642480 | lead-out | 1 | 0x00 | 0x41 07:20:32 #15 Phase 120 File dlgbrnst.cpp, Line 1845 Création d'une image pour la gravure 07:20:32 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 07:20:46 #17 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 07:20:46 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #12288): write at #12288 07:20:46 #19 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 07:20:46 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #12560): write at #12560 07:31:13 #21 SCSI -1128 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04571000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x19 0x0F 0xB0 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x11 0x00 07:31:16 #22 SCSI -1128 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04571000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x19 0x0F 0xB0 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x11 0x00 07:31:16 #23 TRANSFER -25 File Reader.cpp, Line 371 Erreur de lecture des données 07:31:17 #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 07:31:17 #25 Phase 67 File dlgbrnst.cpp, Line 1845 La gravure a échoué
===== Disc-Copy over image - 2nd step : Burn the image ...
07:20:05 #1 SCSI -1081 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x53 Sense Qual: 0x02 CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x53 0x02 07:20:32 #2 Text 0 File DlgWaitCD.cpp, Line 258 Write in overburning mode: NO (enabled: CD) 07:20:32 #3 Text 0 File DlgWaitCD.cpp, Line 419 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the original disc. (Medium in drive: Inconnu. Medium required by compilation: DVD.) 07:20:32 #4 Text 0 File Reader.cpp, Line 118 Reader running 07:20:32 #5 Text 0 File Writer.cpp, Line 124 Writer Image Recorder running 07:20:32 #6 Text 0 File DVDCopy.cpp, Line 271 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 12272 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0) S01 T02 Con 0x14 Start 12288 Len 256 (gap 16) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0) S01 T03 Con 0x14 Start 12560 Len 1629856 (gap 16) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0) S01 T04 Con 0x14 Start 1642432 Len 16 (gap 16) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0) S01 T05 Con 0x14 Start 1642464 Len 16 (gap 16) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0) 07:20:32 #7 Text 0 File DVDCopy.cpp, Line 374 Max -1 tracks of 5 allowed to copy 1: 0 - 12272 = 12272, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 2: 12288 - 12544 = 256, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 3: 12560 - 1642416 = 1629856, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 4: 1642432 - 1642448 = 16, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 5: 1642464 - 1642480 = 16, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 07:20:32 #8 Text 0 File Burncd.cpp, Line 3172 Turn on Piste par piste, using DVD-R/RW media 07:20:32 #9 Text 0 File DlgWaitCD.cpp, Line 246 Last possible write address on media: 2147483646 (477218:35.21, 4194303MB) Last address to be written: 1642479 (364:59.54, 3207MB) 07:20:32 #10 Text 0 File DlgWaitCD.cpp, Line 258 Write in overburning mode: NO (enabled: CD) 07:20:32 #11 Text 0 File DlgWaitCD.cpp, Line 2143 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 07:20:32 #12 Text 0 File DlgWaitCD.cpp, Line 419 >>> Protocol of DlgWaitCD activities: <<< ========================================= 07:20:32 #13 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Données (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 12288 (12288) = #12288/2:43.63 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 12288 blocks [ Image Recorder ] 1: TRM_DATA_MODE1 (2 - Données (mode 1)) 2 indices, index0 (0) not provided original disc pos #12288 + 272 (272) = #12560/2:47.35 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 272 blocks [ Image Recorder ] 2: TRM_DATA_MODE1 (3 - Données (mode 1)) 2 indices, index0 (0) not provided original disc pos #12560 + 1629872 (1629872) = #1642432/364:59.7 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1629872 blocks [ Image Recorder ] 3: TRM_DATA_MODE1 (4 - Données (mode 1)) 2 indices, index0 (0) not provided original disc pos #1642432 + 32 (32) = #1642464/364:59.39 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 32 blocks [ Image Recorder ] 4: TRM_DATA_MODE1 (5 - Données (mode 1)) 2 indices, index0 (0) not provided original disc pos #1642464 + 16 (16) = #1642480/364:59.55 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [ Image Recorder ] -------------------------------------------------------------- 07:20:32 #14 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [ Image Recorder ] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 5: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 25473024, ISRC "" 2: TRM_DATA_MODE1, 2048/0x00, FilePos 25473024 25473024 26030080, ISRC "" 3: TRM_DATA_MODE1, 2048/0x00, FilePos 26030080 26030080 3364007936, ISRC "" 4: TRM_DATA_MODE1, 2048/0x00, FilePos 3364007936 3364007936 3364073472, ISRC "" 5: TRM_DATA_MODE1, 2048/0x00, FilePos 3364073472 3364073472 3364106240, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 12288 | 2 | 0 | 0x00 | 0x41 12288 | 2 | 1 | 0x00 | 0x41 12560 | 3 | 0 | 0x00 | 0x41 12560 | 3 | 1 | 0x00 | 0x41 1642432 | 4 | 0 | 0x00 | 0x41 1642432 | 4 | 1 | 0x00 | 0x41 1642464 | 5 | 0 | 0x00 | 0x41 1642464 | 5 | 1 | 0x00 | 0x41 1642480 | lead-out | 1 | 0x00 | 0x41 07:20:32 #15 Phase 120 File dlgbrnst.cpp, Line 1845 Création d'une image pour la gravure 07:20:32 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 07:20:46 #17 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 07:20:46 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #12288): write at #12288 07:20:46 #19 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 07:20:46 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #12560): write at #12560 07:31:13 #21 SCSI -1128 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04571000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x19 0x0F 0xB0 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x11 0x00 07:31:16 #22 SCSI -1128 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04571000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x19 0x0F 0xB0 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x11 0x00 07:31:16 #23 TRANSFER -25 File Reader.cpp, Line 371 Erreur de lecture des données 07:31:17 #24 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 07:31:17 #25 Phase 67 File dlgbrnst.cpp, Line 1845 La gravure a échoué
Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 2005-08-19 02:00:00 File 'Drivers\PXHELP20.SYS': Ver=3.00.83a, size=44944 bytes, created 2009-04-28 15:20:06 (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 2006-03-23 17:15:58 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 2006-03-23 17:15:56 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 2006-03-23 17:00:28 (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.5512 (xpsp.080413-2108), size=96512 bytes, created 2008-04-13 13:40:30 (Adapter driver for rec)
Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Merci Charlot
Dernière édition par charlot le Décembre 30th 2010, 10:05, édité 3 fois | |
|